Skip to main content

Thirty Four. Yep. 34!



You read that right. TheHoff is now 34 years old and going strong. And dare I say looking more handsome as ever as time proves good design is timeless.

I’ve spent a fair deal of time thinking about the life and times that this particular car has enjoyed. I say enjoyed because clearly this Porsche 944 has been well loved during its lifetime. There’s no sign of misuse or neglect like many older “poor mans Porsche’s” have suffered. No, TheHoff has been loved for certain. 

Is it concours, of course not. This has never been a car that has not stood still for long. It’s owners have seen to it that it had all it needed mechanically while they smiled putting on the miles. This is no garage queen. This is a driven Porsche.



You can tell if a car has been loved. Simply by looking at its interior. At thirty four this interior looks almost like it left the showroom last Christmas - TheHoff was built in December. People have looked at the interior and marvelled - it’s a lovely burgundy place to be seated. So this car has been used but clearly never abused.

Long live TheHoff.




Labels:

Comments

  1. disasterbus28 February 2021 at 18:48

    Any News on The Hoff? Just checked your Retro Rides posts and no updates there for a while. I've had a 944 before and might be tempted by another if The Hoff is up for sale anytime?

    ReplyDelete
  2. faizan2224 September 2022 at 10:47

    For those who own a Porsche 944, keeping it in top condition is crucial. While the car is definitely a head-turner, it's also a high-performance machine that needs to be well-maintained. Fortunately, there are plenty of authorized Porsche service centers around that can help with everything from routine maintenance to more serious auto repairs.

    ReplyDelete
  3. Carzilla Auto Services12 June 2023 at 11:39

    Thanks a lot for sharing this great post with us. I always find great knowledge from your site. Keep it up. Bmw repair specialist in Dubai

    ReplyDelete

Post a Comment

Popular posts from this blog

Engine out the top - Easy Peasy

After reading numerous posts, the Porsche workshop manual and Clarks Garage step-by-step engine removal guide - I felt confident enough to tackle the job. But I wanted to remove the engine from the top.  As I discovered, it was pretty straight forward even for a novice! Result. I wanted to avoid removing the cross member and disturb the front suspension to do something I was convinced could be done easier from the top. Posts such as this one convinced me to give it a go at least. And I'm glad I did. In summary I was able to remove the engine from the top without needing to remove the bonnet/hood; torque tube; transaxle; bellhousing; clutch; clutch slave cylinder; cross member; front suspension; and radiator. Contrary to many so called internet experts opinions and many confusing threads this was painless and without dread. All that was necessary to remove was the starter; power steering pump and alternator (I figured to make the bottom of the engine narrower); intak
19 comments
Read more

New Steering shaft bearing Nightmare removal

In my quest to tighten up the handling on the 944, I bought a new Needle Bearing from Porsche in an attempt to eliminate the fore-aft play in the steering at the top universal joint. The part number for the replacement is 477.419.059 and costs £88.86 posted from an OPC. Nothing like the effort required to actually remove the old one... I began the process by reading section 48 of Porsche Workshop manual. It appeared a simple enough process but two things bothered me: firstly, it required a chisel to remove a shear bolt (which in my limited experience never "shear"; and secondly a drill to remove two screws from the ignition lock. I was bothered because a quick look under the dashboard made it quite obvious that whoever had written the manual hadn't performed this task - well not without a dashboard in place that's for sure. I was bothered before I'd even started. Furthermore, the manual doesn't detail the replacement of this bearing at all - just the rem
3 comments
Read more

Bellhousing & Clutch fork removal

Removing the bellhousing from the Porsche 944 engine is not as complicated as it may seem - such as in this situation with my replacement engine. When I removed the original engine I detached it from the bellhousing in the car and removed the clutch pressure plate bolts through the starter motor hole - see my other post for details . In this case I decided to remove the clutch fork pivot shaft bolt. Begin by removing the four 17mm bellhousing bolts - you'll find that the bellhousing doesn't detach completely from the engine. It'll feel like its hooking on something. That something is the clutch fork pivot shaft inside the bellhousing. The bellhousing will be loose enough to rotate - turn it 180 degrees and peek through the access port which is now on top - this is what you'll see: If the engine is still in car you'll be looking at this from underneath. The pivot shaft needs to be extracted from the clutch fork. It's held in place by a small bolt on the
5 comments
Read more